KEPCO KLN Series (750W, 1500W, 3000W), Main Contro Firmware Version 1.70 and higher - Manual (Page 103)

KLN Series 051614
B-9
B.44 SYSTem:COMMunicate:LAN:DNS? QUERY
SYST:COMM:LAN:DNS?
Syntax: Short Form: SYST:COMM:LAN:DNS? Long Form: SYSTem:COMMunicate:LAN:DNS?
Description: Returns the DNS Address.
Return Format: “
Example: SYST:COMM:LAN:DNS? returns DNS address “8.8.8.8”.
B.45 SYSTem:COMMunicate:LAN:DNS:AUTO COMMAND SYST:COMM:LAN:DNS:AUTO
Syntax: Short Form: SYST:COMM:LAN:DNS:AUTO { ON | OFF | 1 | 0 }
Long Form: SYSTem:COMMunicate:LAN:DNS:AUTO { ON | OFF | 1 | 0 }
Description: Used to enable the power supply to automatically obtain the DNS addresses from the DHCP
server. This command is invalid when DHCP set to ON.
Argument: or 1 enables automatic DNS addresses from DHCP
or 0 disables automatic DNS addresses from DHCP
Example: SYST:COMM:LAN:DNS:AUTO 1 enables DNS addresses to be obtained automatically from
DHCP.
B.46 SYSTem:COMMunicate:LAN:DNS:AUTO? QUERY
SYST:COMM:LAN:DNS:AUTO?
Syntax: Short Form: SYST:COMM:LAN:DNS:AUTO?
Long Form: SYSTem:COMMunicate:LAN:DNS:AUTO?
Description: Indicates whether automatic DNS addresses from DHCP is on (enabled) or off (disabled).
Returns 1 to indicate the automatic DNS addresses from DHCP is on, 0 to indicate automatic DNS
addresses from DHCP is off.
Return Format: { 1 | 0 }
Example: SYST:COMM:LAN:DNS? returns DNS address “8.8.8.8”.
B.47 SYSTem:COMMunicate:LAN:GATEway COMMAND
SYST:COMM:LAN:GATE
Syntax: Short Form: SYST:COMM:LAN:GATE
Description: Sets a static default gateway address to be used during communication via the LAN inter-
face. This command is invalid if DHCP is enabled (on).
Argument:
Example: SYST:COMM:LAN:GATE 192.168.0.1 assigns the static default gateway address to be
192.168.0.1.
B.48 SYSTem:COMMunicate:LAN:GATEway? QUERY
SYST:COMM:LAN:GATE?
Syntax: Short Form: SYST:COMM:LAN:GATE? Long Form: SYSTem:COMMunicate:LAN:GATEway?
Description: Indicates static default gateway address to be used during communication via the LAN
interface.
Return Format:
Example: SYST:COMM:LAN:GATE? returns 192.168.0.1 (static default gateway address).
B.49 SYSTem:COMMunicate:LAN:IP COMMAND
SYST:COMM:LAN:IP
Syntax: Short Form: SYST:COMM:LAN:IP
Description: Sets the IP address for communication via the LAN interface. Changing this address requires
that power to the KLN be cycled off, then on.
Argument:
Example: SYST:COMM:LAN:IP 192.168.0.100 sets the IP address to 192.168.0.100.