beautypg.com

3 how to register the various management settings – TA Triumph-Adler DC 2062 User Manual

Page 99

background image

Section 8 COPIER MANAGEMENT

2A080030A

KM-6230 (KME)

/ 131

2. Touch the “MANAGEMENT” key.

3. Use the numeric keys to enter the management pin code “6200”.

If the pin code you entered matches the registered one, the screen will change to the copy
management mode set-up screen. See “

3 How to register the various management set-

tings” in order to make the desired settings.
* You can change the 4-digit management pin code as desired. (See “

9 Management pin

code change” on page 8-11.)

3 How to register the various management settings

Registering new department codes
1. Enter the copy management select mode. (See page 8-1.)
2. Touch the “SET CODE” key.

3. Touch the “REGISTER” key.
4. Use the numeric keys to enter the department code (4-digit) that you want to register.

5. Touch the “REGISTER” key.

* If that department code has already been registered, “ID-CODE IS ALREADY IN USE.”

will appear in the message display. Press the “RE-ENTER” key and enter another de-
partment code.

8-2