TA Triumph-Adler DC 2062 - Manual (Page 112)

Section 8 COPIER MANAGEMENT
2A080030A
KM-6230 (KME)
/ 131
0 Auto shut-off ON/OFF
1. Select whether to use the auto shut-off function or not by touching the “ON” key or the
“OFF” key, as appropriate.
* If you want to continue changing other default settings, follow the procedure that corre-
sponds to that setting. Once you are finished, touch the “END” key and then the “BASIC”
key. The touch panel will return to the basic screen.
! Date & time
1. If you want to change the currently displayed date and time, touch the “CHANGE” key.
2. Change the year, month, date and time by touching the corresponding “+” key or “-” key, as
appropriate.
* Be sure to enter the time on a 24-hour basis (00:00 - 23:59).
3. Once you are finished, touch the “END” key.
4. A message that checks to make sure that you want to register this change will appear. This
is because there is a possibility that the data for certain copy jobs saved within synergy
print boxes and virtual mailboxes might be deleted if you change the currently registered
time. If you are certain that you want to change the time, touch the “OK” key.
* If you want to continue changing other default settings, follow the procedure that corre-
sponds to that setting. Once you are finished, touch the “END” key and then the “BASIC”
key. The touch panel will return to the basic screen.
[2] Copy-related defaults
● Types of copy defaults
The 20 different default settings defined as “copy defaults” are described below. Change the settings for any or all of them as appropriate to your
desired copying conditions.
Default setting Page Explanation
1 Exposure mode Specify which copy exposure mode you want to be automatically selected each time the copier
is turned ON, the auto exposure mode (see page 4-2) or the manual exposure mode (see page
4-1).
2 Exposure step
Select how many exposure levels you want there to be in the manual exposure mode: 7 or 13.
3 Toner economy mode Specify whether you want the toner economy mode to be automatically selected or not each
time the copier is turned ON. It is also possible to disable selection of the toner economy mode.
4 Auto exposure adjustment Adjust the overall exposure level for the auto exposure mode.
8-15
8-18
8-18
8-18
8-18