TA Triumph-Adler DC 2062 - Manual (Page 161)

Section 10 TROUBLESHOOTING
2A080030A
KM-6230 (KME)
/ 131
5. Cleaning the copier
CAUTION
For safety purposes, ALWAYS remove the power plug from the outlet when
performing cleaning operations.
● Cleaning the original protector and the DF scanning cover
Lift open the DF and wipe the original protector
a and the DF scanning cover b with a
soft cloth dampened with alcohol or mild detergent.
* DO NOT use thinner or other solvents.
● Cleaning the platen and the slit glass section
Lift open the DF and wipe the platen and the slit glass section
c with a soft cloth dampen
with alcohol or mild detergent.
* DO NOT use thinner or other solvents.
* If the slit glass section of the DF becomes dirty, black lines may appear on finished
copies (as shown in the illustration at left). If such black lines do appear on your cop-
ies, perform the cleaning procedure on the slit glass section as described above.
CAUTION
DO NOT leave the document feeder open as there is a danger of personal
injury.
● Cleaning the touch panel
If the surface of the touch panel becomes dirty, wipe it gently with a dry cloth. If the dirt is
difficult to remove, dampen the cloth slightly with alcohol.
* DO NOT use water, thinner or other organic solvents.
10-20