TA Triumph-Adler DC 2062 - Manual (Page 39)

Section 5 OTHER CONVENIENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
(1) Making a margin space in the copies for binding, etc. [Margin mode]
● Left margin
The image of the original will be shifted to the right in order to make a margin for binding on
the left side of the copy paper. The margin width can be set between 6 mm and 18 mm in
1 mm increments.
POINT OF INFORMATION
If you select to make a left margin when you are making two-sided copies, a right margin – of
the same width as you select for the front side – will automatically be set for the back side.
● Top margin
The image of the original will be shifted downward in order to make a margin for binding on
the top side of the copy paper. The margin width can be set between 6 mm and 18 mm in
1 mm increments.
* The margin position that is available for the back side will differ depending upon the margin position that is selected for the front side.
The circle (“ ❍ ”) indicates the possible settings.
● Front & back margin
When you are making two-sided copies, the margin positions and margin width can be se-
lected separately for the front and back sides of the copies. The margin width can be set
between 1 mm and 18 mm in 1 mm increments.
* In order to set the front and back margins separately, it is necessary in advance to select
“ON” under “ $ Front & back margin key ON/OFF” on page 8-16.
“LEFT M.” “RIGHT” “TOP M.” “BOTTOM” “NO”
Front side
“LEFT M.”
“RIGHT”
“TOP M.”
“BOTTOM”
“NO MARGIN”
Back side
❍
❍
❍
❍
❍
❍
❍
❍
❍ ❍
❍
❍
❍
❍
❍
5-1
Section 5 OTHER CONVENIENT FUNCTIONS
E_Sec5_Kinou.PM6 10/16/00, 7:13 2