TA Triumph-Adler DC 2062 - Manual (Page 34)

Section 4 BASIC OPERATION
4-8
2A080030A
KM-6230 (KME)
/ 131
4. Specify the binding orientation of the originals.
The touch panel will return to the basic screen.
5. Select the direction of copying that you want for the back side of the copies.
The touch panel will return to the basic screen.
(4) Interrupt copying
The interrupt copying function is useful when you want to make copies from new originals
and at different settings when another copying operation is already in progress. If you want to
make copies from originals that were registered using the job reservation function, you can
use the copy modes, etc., that were already selected for that job. Once the interrupt copying
job is finished, the operation that was interrupted will resume at the same settings it was
using before the interruption.
1. Press the Interrupt key. The Interrupt indicator will blink.
* If there are any originals that were registered using the job reservation function, “SELECT
INTERRUPT MODE” will be displayed. If you want to make copies from those registered
originals, touch the “PRIORITY OUTPUT” key and go to step 5. If you want to make copies
from different originals, touch the “INTERRUPT COPY” key and go to the next step.
4-7