TA Triumph-Adler DC 2062 - Manual (Page 134)

Section 9 OPTIONAL EQUIPMENT
2A080030A
KM-6230 (KME)
/ 131
1. Grasp the front cover handle and open the front cover towards you.
2. Grasp the internal tray handle and carefully pull the internal tray out towards you.
9 9 9 9 9 Stapling Unit
The Stapling Unit has two separate staplers for stapling documents in two different places.
Accordingly, when staples run out in either stapler, they must be replenished separately.
* If the staples run out, contact the service representative for your copier.
0 0 0 0 0 Refilling the Stapling Unit
If a message appears on the copier indicating that staples have run out, the staple holder(s)
need to be replenished with staples.
* When “(FRONT)” appears in the message display, the front stapler is empty and when
“(REAR)” appears in the message display, the rear stapler is empty.
* The procedure to refill either stapler is the same.
3. Grasp the Stapling Unit handle and lift up the Stapling Unit. The two staplers will
become visible.
4. Pinch the staple holder release lever as shown in the illustration and lower it to release
the lock.
9-6