TA Triumph-Adler DC 2062 - Manual (Page 64)

Section 5 OTHER CONVENIENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
5. Select the binding orientation that you want for the finished copies by touching either the
“LEFT” or “RIGHT” key.
The finishing set-up screen will appear.
6. Set the number of copies that you want to make by touching the “+” key or the “-” key.
7. If you want to bind (staple) the finished copy sets, touch the “STAPLE SORT” key.
8. Once you are finished setting the number of copies and selecting the stapling settings that
you want, touch the “ENTER” key.
9. Set the originals.
* When setting the originals on the platen, start with the first page.
10. Press the Start key.
(13) Inverting black and white [Invert copy mode]
The black and white areas of the image are inverted (reversed) on the copy.
* When multiple inverted copies are made, “PLEASE WAIT. NOW ADDING TONER.” may
appear in the message display.
1. Set the originals.
2. Touch the “FUNCTION” key.
The function select screen will appear.
3. Touch the “INVERT” key. (If that key is not displayed, touch the “ ▼ ” key or the “ ▲ ” key until
it is displayed.)
The touch panel will return to the basic screen.
(14) Making mirror-image copies [Mirror image mode]
This mode can be used to make mirror-image copies.
1. Set the originals.
5-26
E_Sec5_Kinou.PM6 10/16/00, 7:14 27