TA Triumph-Adler DC 2062 - Manual (Page 100)

Section 8 COPIER MANAGEMENT
2A080030A
KM-6230 (KME)
/ 131
6. Use the numeric keys to enter the limit for the number of copies that can be made by that
department. The limit can be set in units of 1,000 sheets, up to a maximum of 999,000.
* Enter “0” to enable unlimited copying.
* If you want to clear the entered department code and enter a new code number, touch
the “CANCEL” key.
7. Touch the “REGISTER” key. The touch panel will return to the screen for step 4.
* To register another department code, repeat steps 4 - 7.
8. Touch the “END” key.
The touch panel will return to the screen for step 3.
9. Touch the “END” key.
The touch panel will return to the copy management mode set-up screen.
10. Touch the “END” key.
The touch panel will return to the basic screen.
● Deleting department codes
1. Enter the copy management select mode. (See page 8-1.)
2. Touch the “SET CODE” key.
3. Touch the “DELETE” key.
4. Touch the department code that you want to delete. [It is possible to select more than one
code.] (If the code you want is not displayed, touch the “ ▼” key or the “▲” key until it is
displayed.)
5. Once you are finished deleting department codes, touch the “END” key.
The touch panel will return to the screen for step 3.
8-3