TA Triumph-Adler DC 2062 - Manual (Page 55)

Section 5 OTHER CONVENIENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
1. Set the transparencies in the stack bypass tray.
POINT OF INFORMATION
• Fan out the transparencies at least once before setting them.
• Up to 25 transparencies can be loaded into the stack bypass tray at one time.
• Make sure that paper of the same size as the transparencies is loaded in one of the drawers
or decks.
2. Set the originals.
3. Touch the “FUNCTION” key.
The function select screen will appear.
4. Touch the “TRANS + BACK” key. (If that key is not displayed, touch the “ ▼ ” key or the “ ▲ ”
key until it is displayed.)
The transparency backing mode set-up screen will appear.
5. Touch the “COPIED” key if you want to copy onto the backing sheet, and the “BLANK” key
if you do not want to copy onto the backing sheet.
5-17
E_Sec5_Kinou.PM6 10/16/00, 7:14 18