TA Triumph-Adler DC 2062 - Manual (Page 121)

Section 8 COPIER MANAGEMENT
2A080030A
KM-6230 (KME)
/ 131
● Accessing the box management procedures
1. Touch the “SPECIAL” key.
The management mode select screen will appear.
2. Touch the “DEFAULT SETTING” key.
3. Use the numeric keys to enter the management pin code “6200”.
If the pin code you entered matches the registered one, the screen will change to the
default select screen.
* You can change the 4-digit pin code as desired. (See “
9 Management pin code change”
on page 8-11.)
4. Touch the “BOX MANAGEMENT” key.
The box management select screen will appear. Follow the procedure below that corre-
sponds to the procedure that you want to perform.
● Procedures
1 Reset box (delete all)
1. Touch the “RESET BOX (DELETE ALL)” key.
8-24