TA Triumph-Adler DC 2062 - Manual (Page 66)

Section 5 OTHER CONVENIENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
4. Touch the program number (“1” to “8”) that you want to register the settings under.
* If you also want to register a name for that program, touch the “NAME REGISTRATION”
key. (See page 8-29 for the procedure on entering the name.)
5. Touch the “END” key.
The selected copy settings and functions will appear. If you want to check more specific
settings for each copy mode, touch the related function key. Once you are finished check-
ing the settings, touch the “CHECK” key.
6. Touch the “REGISTER” key for final registration of the settings.
The touch panel will return to the basic screen. Copying is now possible using the settings
that are registered under that program number.
2 Copying with a registered program
1. Press the Program key.
The program select screen will appear.
* If “OFF THE PLATEN” is selected under “
9 Job programming” on page 8-16 and there
are settings registered under program 1, those copy functions will be automatically dis-
played. In this case, go to step 4.
* If “REGULAR” is selected under “ 9 Job programming” on page 8-16, you can select the
program you want from among those registered. In this case, go to the next step.
2. Touch the number that corresponds to the program that you want to use.
3. The copy functions and settings registered under the selected program will be displayed.
Touch the “COPY” key.
The touch panel will return to the basic screen.
4. Set the originals and press the Start key to start copying with the displayed functions and
settings.
5-28
E_Sec5_Kinou.PM6 10/16/00, 7:14 29