TA Triumph-Adler DC 2062 User Manual
Page 151
Section 10 TROUBLESHOOTING
2A080030A
KM-6230 (KME)
/ 131
7. Remove the misfed paper without tearing it.
4
4
4
4
4 Misfeed in the duplex unit
If “PAPER JAM IN DUPLEX UNIT. OPEN DUPLEX UNIT DRAWER.” and the misfeed
location
indicators shown in the illustration appear on the touch panel, paper has misfed in the
duplex unit.
1. Open the paper ejection cover and, if the misfed paper is visible, remove it.
* If the copier is equipped with the optional Finisher or optional Copy Tray, first detach
or remove it from the copier, as appropriate, and then reattach/replace it in its origi-
nal position once the procedure to remove the misfed paper is finished.
* If the misfed paper is not visible, go to the next step.
2. Open the front cover.
3. Pull the duplex unit out towards you as far as it will go.
10-10
8. Close the fixing unit cover.
9. Push the conveyor section all the way back into its original position in the copier and
return the release lever to its original position as well.
10. Close both the paper ejection cover and the front cover.
* If necessary, reattach the Finisher to the copier or replace the Copy Tray in its
original position.