TA Triumph-Adler DC 2062 - Manual (Page 149)

Section 10 TROUBLESHOOTING
2A080030A
KM-6230 (KME)
/ 131
4. Carefully pull out the paper conveyor section.
5. Remove the misfed paper without tearing it.
* If the paper does happen to tear, remove any loose scraps from inside the copier.
6. Open the fixing unit cover and check for the misfed paper. If the misfed paper is
visible, remove it without tearing it and then close the fixing unit cover.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient care when working
in this area, as there is a danger of getting burned.
7. Push the conveyor section all the way back into its original position in the copier and
return the release lever to its original position as well.
8. Close the front cover.
3 3 3 3 3 Misfeed in the fixing unit or ejection section
If “PAPER MISFEED. REMOVE PAPER FROM FIXING UNIT.” and the misfeed location
indicators shown in the illustration appear on the touch panel, paper has misfed in the
fixing unit or the ejection section.
1. Open the front cover.
2. Turn the fixing unit knob in the direction of the arrow to eject the misfed paper.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient care when working
in this area, as there is a danger of getting burned.
10-8