TA Triumph-Adler DC 2062 - Manual (Page 106)

Section 8 COPIER MANAGEMENT
2A080030A
KM-6230 (KME)
/ 131
4. Set the time (hour and minutes) that you want the copier to be turned ON by touching the
corresponding “+” key or the “-” key.
5. Touch the “OFF” key.
6. Set the time (hour and minutes) that you want the copier to be turned OFF by touching the
corresponding “+” key or the “-” key.
7. Touch the “ENTER” key.
The touch panel will return to the screen for step 3.
* To set the ON/OFF times for other days of the week, repeat steps 3 - 7.
8. Once you are finished setting the ON/OFF times, touch the “ENTER” key.
The touch panel will return to the weekly timer set-up screen.
9. Touch the “END” key.
The touch panel will return to the basic screen.
● Canceling the timer function
1. Enter the weekly timer select mode. (See page 8-7.)
2. Touch the “CANCEL” key.
3. Touch the desired day of the week for which you want to temporarily cancel the weekly
timer. “CANCEL” will be displayed on the key for that day.
* It is possible to select more than one day.
* If you want to remove the “CANCEL” designation, simply touch that day again.
“CANCEL” will disappear and the originally set ON/OFF times will be displayed.
8-9