TA Triumph-Adler DC 2062 - Manual (Page 77)

Section 6 ADVANCED COPY MODES
6-11
2A080030A
KM-6230 (KME)
/ 131
* If you want to change the setting for the border erase mode, touch the “+” key or the “-” key
at the right of the border width display to select the desired width. The border width can be
set to 6 mm, 12 mm or 18 mm.
* In this setting, only sheet originals can be selected for use in the border erase mode.
* The settings for the border erase mode can be changed for each job.
* If you touch the “FUNCTION” key, the following copy functions can be selected.
• Margin mode: Touch the “MARGIN” key and follow the procedure from step 3 on
page 5-2.
• Combined copy mode: Touch the “MERGE COPY” key and follow the procedure from
step 3 on page 5-20.
• Print page numbers function: Touch the “PAGE #” key and follow the procedure from step
4 on page 5-4.
8. Set the originals.
* Be sure to set the type of originals selected in steps 3 and 5.
9. Press the Start key.
10. If you want to scan in more originals, touch the “CONTINUE” key.
* If you selected “SHEET & BOOK ORIGINALS” in step 3, continue scanning by repeat-
ing the procedure from step 5.
If you selected “BOOK ORIGINALS”, continue scanning by repeating the procedure
from step 6.
If you selected “SHEET ORIGINALS”, continue scanning by repeating the procedure
from step 7.
* Once all of the originals have been completely scanned, go to step 11.
* To delete the last set of the originals that you scanned, touch the “CLEAR LAST JOB”
key.
* If you want to make a test copy, touch the “TEST PRINT” key.
Once the test copy has been made, the touch panel will return to the screen for step 10.
11. Touch the “TO PRINT” key.
12. Select how you want the copies to be finished.
* If you want to change the Sorting mode, touch the “SORT” key to highlight the desired
mode (Sort or Group).
* If the copier is equipped with the optional Finisher, it is also possible to change the
Staple-Sort mode and the Hole Punch mode settings.
* If the copier is equipped with the optional Booklet Stitcher, it is the Staple-Sort mode
settings that can also be changed.
13. Set the number of copies that you want to make by touch the “+” key or the “-” key. This
number can also be entered directly with the numeric keys.
14. Touch the “END” key. Copying will begin.
6-10