TA Triumph-Adler DC 2062 - Manual (Page 45)

Section 5 OTHER CONVENIENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
1. Set the originals.
* When using a book as the original, set it on the platen as shown in the illustration.
2. Touch the “FUNCTION” key.
The function select screen will appear.
3. Touch the “BORDER” key. (If that key is not displayed, touch the “ ▼ ” key or the “ ▲ ” key
until it is displayed.)
The border erase set-up screen will appear.
4. If you want to change the width of the border that will be erased under “SHEET” or “BOOK”,
touch the “+” key or the “-” key. The border width can be set to 6 mm, 12 mm or 18 mm.
* In order to use the “CUSTOM” key with non-standard paper sizes, the size of the origi-
nals that you will use must be registered in advance. (See “ # Custom border erase size”
on page 8-16.)
5. Specify the type of the originals that are being used by touching either the “SHEET”,
“BOOK” or “CUSTOM” key.
The touch panel will return to the basic screen.
(5) Adding covers for or insert sheets between copies [Sheet copy mode]
The sheet copy mode has three submodes: cover, insert and chapter.
5-7
E_Sec5_Kinou.PM6 10/16/00, 7:13 8