TA Triumph-Adler DC 2062 - Manual (Page 46)

Section 5 OTHER CONVENIENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
1 Submodes
● Cover mode
Special paper that is set in the stack bypass tray is fed as a front cover, or as both a front and back cover, to the copy sets. With this mode, you can
select whether you want both sides or only one side of the front cover to be copied onto, or to have it left completely blank. Select also whether or not
you want the back cover to be copied onto as well.
* See the following table for the combination of available settings and styles of finished copy sets.
● Insert mode
Special paper can be inserted at specified locations among copies made from multiple originals. You can also select whether or not you want the insert
sheets themselves to be copied onto.
* The drawer in which the insert sheets will be loaded must be selected in advance. (See “ % Drawer for insert sheets” on page 8-16.)
* The available settings will differ depending upon the type of originals being used and type of copies that you want to make.
The circle (“ ❍ ”) indicates the possible settings.
5-8
“FRONT”
“BACK”
“FRONT” “BLANK”
“2-SIDED”
*1
“FRONT”
*1
“BLANK”
*2
“NO”
“1-SIDED”
copy
“1-SIDED”
original
“DUPLEX”
original
“1-SIDED”
original
“DUPLEX”
original
“SPLIT”
copy
“DUPLEX”
copy
“FR./BACK COPY” “FRONT COPY” “FR./BACK BLANK”
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
* 1: An example of two-sided copying is illustrated.
* 2: An example of one-sided copying is illustrated.
E_Sec5_Kinou.PM6 10/16/00, 7:13 9