TA Triumph-Adler DC 2062 - Manual (Page 59)

Section 5 OTHER CONVENIENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
6. Select the type of finished copies that you want to make by touching either the “DUPLEX”
or “1-SIDED” key. The touch panel will return to the basic screen.
* When selecting “DUPLEX” copies, choose between the left “DUPLEX” key for normal
copying (like in a bound book) and the right “DUPLEX” key for rotating the copying direc-
tion on the back side of the copies (like on a calendar).
7. Set the originals.
* When setting originals on the platen, make sure that you set them in the correct order.
(See page 5-19.)
8. Touch the paper size key that corresponds to the paper that you want to copy onto.
9. Press the Start key.
(10) Making a booklet (sheet originals) [Booklet copy]
This mode can be used to copy one-sided or two-sided originals onto two-page [open-face],
two-sided copies in such a way that the finished copies can be stacked and folded into a
booklet format.
POINT OF INFORMATION
The size of originals that can be used in this mode is limited to A4 and the paper size is
limited to A3 or A4R.
1 Right-side binding orientation
The order of copying will be performed so that the stacked and folded pages of the
finished copies will read from right to left.
2 Left-side binding orientation
The order of copying will be performed so that the stacked and folded pages of the
finished copies will read from left to right.
5-21
E_Sec5_Kinou.PM6 10/16/00, 7:14 22