Yaskawa MP920 Communications Module - Manual (Page 94)

5.6 Relay Function
5-33
5
4. NW#2 ST#12
• Message Relay Function: Yes
• No. of Relayed Network 1: 1 to 3
• No. of Relayed Network 2: Not set
5. NW#4 ST#30
• Message Relay Function: Yes
• No. of Relayed Network 1: 4 to 4
• No. of Relayed Network 2: Not set
6. NW#1 ST#2 to ST#3
NW#2 ST#11
NW#3 ST#21 to ST#22
NW#4 ST#31 to ST#32
• Message Relay Function: Yes
• No. of Relayed Network 1: 1 to 4
• No. of Relayed Network 2: Not set
Remarks
With a configuration of two or more networks, be sure that the Machine Controller that per-
forms network relaying is linked to only one station in each network.
In the example given above, the following five stations conform to this requirement.
• NW#1: ST#1
• NW#2: ST#10 and ST#12
• NW#3: ST#20
• NW#4: ST#30
A Machine Controller that performs network relaying is an MP920 Machine Controller with two or
more 215IF Modules with ports connected to different networks to transfer data between the networks.
INFO