Yaskawa MP920 Communications Module - Manual (Page 328)

Appendix D Wiring Communications
D.6.3 Crystal Fiber Cords for Long Wavelength
D-36
D.6.3 Crystal Fiber Cords for Long Wavelength
* Temporary tension applied when the cable is laid. The maxim allowable tension that can be
applied to the neck of the optical connector is 2 kg. The applicable optical connector is FC type
(complying with JIS C 5970 F01).
Note: 1. For cable specifications other than those shown above, contact your Yaskawa representa-
tive.
2. If cables manufactured by another company are to be used, present the above optical fiber
core specifications to that company.
Table D.5 Cable Specifications (GIñ50/125, l = 1,300 nm)
Item Specifications
Cable Type Single-core cord Indoor cable Indoor cable Outdoor cable Outdoor cable
Representative Model
(Manufactured by Sumitomo
Electric Industries, Ltd.) CSV-EG-5/0702 2GI-C-V-NM 2GI-GS-E-NM 2GI-L-4C-LAP 2GI-C-LAP
Optical Fiber
Core
Specifications Optical Fiber
Type Graded-index (GI) fiber
Transmission
Loss 0.7 dB/km max. ( λ = 1300 nm)
Transmission
Bandwidth 200 MHz ⋅km min.
Core and
Clad Material: Crystal glass, Diameter: 50 ±3 µm
Material: Crystal glass, Diameter: 125 ±3 µm
Numerical
Aperture
(NA) 0.21 ±0.02
Number of Cores 1 2
Sheath Black PVC Black PVC Black PE Black PE Black PE
Tension Member None 1.2-mm-dia. FRP 4.5-mm-dia. FRP 2.3-mm-dia. cop-
per wire with PE
insulation 1.0-mm-dia.
copper wire with
PE insulation
Finished Outer Diameter
(mm) 3 11 14 12 12
Approximate Mass (kg/km) 9 110 140 130 115
Storage
Temperature Maximum 0 °C 0 °C -20 °C -20 °C 0 °C
Minimum 60 °C 60 °C 60 °C 60 °C 60 °C
Operating
Temperature Maximum 0 °C 0 °C -20 °C -20 °C 0 °C
Minimum 60 °C 60 °C 60 °C 60 °C 60 °C
Maximum Allowable Tension
(kg)
*
15 50 150 150 50
Allowable
Bending
Radius
(mm) Temporary
Bending (No
Load) 30 120 450 120 120
Long-term
Bending (No
Load) 60 240 450 240 240
Maximum Allowable
Temporary Lateral Pressure
(kg/50 mm) None None 150 100 100