Yaskawa MP920 Communications Module - Manual (Page 151)

7.2 Part Names
7-5
7
7.2 Part Names
This section explains the LED indicators and switch settings for the 218IFA Module.
7.2.1 218IF Module
„ LED Indicators
When the Module is operating normally, the RUN LED indicator will be lit and the ERR
LED indicator will not be lit. If a failure occurs, the RUN LED indicator will turn OFF and
the ERR LED indicator will light or flashes. The TX LED indicator and RX LED indicator
will light when sending/receiving data.
LED indicators
10 Base-T
DIP switch
Label Name Color Status when Lit
RUN Run Green Operating normally
ERR Error Red Failure occurred (See next page.)
TX 218TX Green 218IF sending data
RX 218RX Green 218IF receiving data
COL Collision Green 218IF detecting collision
RUN
ERR
TX
RX
COL