Yaskawa MP920 Communications Module - Manual (Page 86)

5.5 CP-215 Transmission Definitions
5-25
5
„ Assigning the I/O Map
The following window displays in bit units the I/O map assignment area from the leading I/
O register number to the end I/O register number that are set in the 215IF Module Definition
Window.
The station number and controller name that are set in the Link Assignment Tab are dis-
played in the corresponding register number row.
Only the amount of scan information in the I/O map assignment area that is set in the SIZE
column of the Link Assignment Tab is displayed. The remaining space is left blank.
1. CIR# (Circuit Number)
Displays the circuit number and range of I/O registers that are being mapped.
2. Register Number
Each column in the table represents the first digit in the register numbers displayed on
the left side of the table. In the following diagram, the cursor is positioned over IW0493.
2.
3.
1.
5.
4.
Register Number
Register Number (first digit)