Yaskawa MP920 Communications Module User Manual
Page 323
D.5 Transmission Line Components
D-31
D
CP-215 Repeater-TP Transmission Line Components
H-PCF Optical Fiber Cords and Cables with Optical Connector
* 1. L is 0.3 m, 1 m, 3m, or 5 m. For 10 m or longer, specify the cable length
in 5-m units.
* 2. L is 1 m, 3m, or 5 m. For 10 m or longer, specify the cable length in 5-
m units.
Note: 1. Refer to D.6.1 H-PCF Cable Specifications for detailed specifica-
tions.
2. A pulling eyelet can be mounted to protect optical connectors. If
this is required, specify optical fiber cords equipped with pulling
eyelet when ordering.
No.
Model (Manufactured by
Sumitomo Electric Industries)
Usage
External Specifications, etc.
1
HCB1-CD202-43-V-2HA-L
*1
(L = 0 to 650 m)
In-panel cord with crimp cut connec-
tors at both ends
No sheath
2
HCB2-CL202-43V8V-2HA-L
*2
(L = 0 to 650 m)
Indoor reinforced cable with crimp
cut connectors at both ends
Vinyl sheath
3
HCB6-CL202-43V13V-2HA-L
*2
(L = 0 to 650 m)
Indoor cord assembly cable with
crimp cut connectors at both ends
Vinyl sheath, cable tension
member included
4
HCB6-CL202-43V13V-2HB-L
*2
Nonstandard cable
(L = 650 to 850 m)
Indoor cord assembly cable with
adhesive grind-type connectors at
both ends
Vinyl sheath, cable tension
member included
5
HCB6-LL202-43V15V-2HA-L
*2
(L = 0 to 650 m)
Outdoor cord assembly cable with
crimp cut connectors at both ends
LAP sheath, tension member
included
6
HCB6-LL202-43V15V-2HB-L
*2
Nonstandard cable
(L = 650 to 850 m)
Outdoor cord assembly cable with
adhesive grind-type connectors at
both ends
LAP sheath, tension member
included