Yaskawa MP920 Communications Module - Manual (Page 249)

Appendix A System Functions
A.2.5 Outputs
A-20
„ CH-NO (Channel No.)
CH-NO specifies the channel number of the communications unit. Only one channel number
can be set for the same line.
„ PARAM (Parameter List Leading Address)
PARAM specifies the leading address of the parameter list. For details on settings, refer to
A.2.3 Parameter Details.
A.2.5 Outputs
„ BUSY (Processing in Progress)
BUSY indicates that the processing is being executed. Keep EXECUTE set to ON.
„ COMPLETE (Processing Completed)
COMPLETE is turned ON for only 1 scan upon normal termination.
„ ERROR (Error Occurred)
ERROR is turned ON for only 1 scan when an error occurs.
For error causes, refer to PARAM00 and PARAM01 described in A.2.3 Parameter Details.
Device Channel No.
215IF 1 to 13
217IF 1
218IF 1 to 10
Serial 1
Applicable
Registers
Leading Address Examples
MW
DW
#W MA00000, MA00100, …
DA00000, DA00200, …
#A00000, #A00300, …