Yaskawa MP920 Communications Module - Manual (Page 220)

8.4 Connection to a Temperature Controller
8-29
8
Receive start
DB000211
DB000202 DB000611 DB000601
Executing
DB000610
Stop
command
DB000602
For stop if still not completed 3 seconds after the
Send command is issued.
Stop counter added when the Stop command is issued.
Function Receive instruction
Issue a Receive Messasge instruction.
Normal pulse counter added
Receive data byte swap (temperature 1 °C).
Receive data byte swap (temperature 1 °C).
Ended by a transmission error
Error pulse counter added
Processing result stored
Status stored
The executing coil turns ON when the CPU receives the
command.
The normal completion or abnormal completion coil turns ON at
processing completion.
Turns ON at receive completion of a query message and send
completion of a response message.
General-purpose message communications
Circuit No.1
Channel No.1
DB000601
003.00 DW00062 T
Command
DB000601 Executing
DB000610
Normal completion
DB000611
Abnormal completion
DB000612
MSG-RCV
EXECUTE BUSY
ABORT COMPLETE
DEV-TYP ERROR
PRO-TYP
CIR-NO
CH-NO
PARAM
DA00050 00005
00002
00003
00001
Stop
DB000602
Normal completion
DB000611
Normal counter
IFON
IEND
DEND
INC DW00064
DW00040 DW00026
DW00027 DW00041
Stop command
DB000602
Normal
completion
DB000611 Abnormal
completion
DB000612
Stop
command
DB000602 Stop
counter
DB00061B
INC DW00063
INC Error counter
DW00065
DB000612 DB000602
BSWAP MW07033
CH1-IN1 receive data
BSWAP MW0735
CN1-IN2 receive data
IEND
Abnormal completion
DB000612
IFON
Send busy
monitoring timer
Settings differ for the 215IF,
217IF, 218IF, and 2500.
Receive data processing
→
→