Yaskawa MP920 Communications Module - Manual (Page 326)

Appendix D Wiring Communications
D.6.1 H-PCF Cable Specifications
D-34
D.6 Optical Cable Specifications
D.6.1 H-PCF Cable Specifications
* Temporary tension applied when the cable is laid. The maxim allowable
tension that can be applied to the neck of the optical connector is 2 kg.
The applicable optical connector is JIS C 5977 F08 type.
Item Specifications
Cable Type Two-core cord Indoor reinforced
cable Indoor cord
assembly cable Outdoor LAP
sheathed cable
Representative Model HCB1-CD202-43-
V HCB2-CL202-
43V8V HCB6-CL202-
43V13V HCB6-LL202-
43V15V
Optical Fiber Type Plastic clad multi-mode optical fiber (manufactured by Toray Industries Inc., H-
PCF, SI type, HCU-FB200-L)
Transmission Loss 7 dB/km max. at wavelength λ = 850 nm (ambient temperature: 25°C)
Core and Clad Material: Crystal glass, Diameter: 200 ±5 µm
Material: Acrylate resin fluoride, Diameter: 230 + 0, -10 µm
Numerical Aperture (NA) 0.37
Transmission Bandwidth 14.5 MHz at λ = 850 nm
Number of Cores 2
Tension Member None Material: Steel cable with plastic sheath
Outer diameter: 2.4 mm
Sheath Orange heat-
resisting PVC Orange heat-
resisting PVC
sheath Black heat-resist-
ing PVC sheath Black LAP sheath
Finished Outer Diameter 4.3 mm 8.4 mm 13.7 mm 15.1 mm
Approximate Mass 15 kg/km 50 kg/km 150 kg/km 170 kg/km
Storage
Temperature Maximum 70 °C 70 °C 70 °C 70 °C
Minimum -40 °C -40 °C -40 °C -40 °C
Operating
Temperature Maximum 60 °C 60 °C 60 °C 60 °C
Minimum -10 °C -10 °C -10 °C -10 °C
Maximum Allowable
Tension
*
20 kg 30 kg 75 kg 75 kg
Allowable
Bending
Radius Temporary
Bending (No
Load) 15 mm 25 mm 50 mm 50 mm
Long-term
Bending (No
Load) 45 mm 50 mm 100 mm 100 mm
Maximum Allowable
Temporary Lateral Pressure None 50 kg/50 mm 100 kg/50 mm 100 kg/50 mm