Yaskawa LEGEND-MC - Manual (Page 213)

203
LEGEND-MC User’s Manual
RS (Master Reset)
[General]
DESCRIPTION:
The Master Reset command resets the LEGEND-MC to factory default settings and erases the EEPROM.
A master reset can also be performed by installing a jumper on the LEGEND-MC at the location labelled
JP1/MR. The controller must be removed from the amplifier to access the jumper. The controller must be
reattached to the amplifier and powered ON to perform the master reset. Remove the jumper after this
procedure.
USAGE:
While Moving Yes Default Value ---
In a Program No Default Format ---
Command Line Yes
Can be Interrogated No
Used as an Operand No Distributed Control No, Local