9 switching on and off, 1 stopping, Switching on and off – SMA SI 3324 Installation User Manual
Page 83: Stopping, 9switching on and off

SMA
Technologie AG
Switching On and Off
Installation Guide
SI3324/4248-14:SE2406
Page 83
9
Switching On and Off
9.1
Stopping
Proceed as follows to place the Sunny Island 3324/4248 in standby mode:
1.
Switch off all loads, as far as this is possible.
2.
Press and hold the "ESC" key until the "To
STOP press ENTER" message appears.
3.
Press "ENTER".
4.
The Sunny Island 3324/4248 stops and
enters the standby mode.
5.
The message "To start press
displayed. The green LED on the control
panel of the Sunny Island 3324/4248 goes
out.
Note that all connected loads are no longer provided with
electrical energy once you have stopped the Sunny Island 3324/
4248.
Note that even in standby mode there is still voltage present in the
inverter (DC, AC input).
In standby mode the Sunny Island 3324/4248 still requires about 4 W of
power from the batteries.
To stop
press
To start
press