SMA SI 3324 Installation - Manual (Page 28)

Installation SMA Technologie AG
Page 28 SI3324/4248-14:SE2406 Installation Guide
If the Sunny Island 3324/4248 is to be
installed on laths, then use the four middle
holes in the wall bracket. Ensure that the wall
bracket is positioned over a wall stud. Make
sure that the wall where you intend to install
the Sunny Island 3324/4248 is vertical and
can carry the weight of the Sunny Island
3324/4248 (39 kg) on a long-term basis.
Use (e.g.) stainless steel Phillips screws (6
mm x 50 mm) with suitable washers,
according to the DIN 571 standard.
This figure shows a detailed view
of the the center distances of the
holes for the wall bracket when
installing on a single wall stud.
Island Sunny
310 mm
30 mm
235 mm
45 mm