SMA SI 3324 Installation - Manual (Page 142)

Menu Structure and Parameter Lists SMA Technologie AG
Page 142 SI3324/4248-14:SE2406 Installation Guide
40-7 GenRequest
(B) Off
On
Auto Auto Operating mode of the generator request
relay.
Select "Off" if no generator is present or
to manually switch off the generator
relay.
Select "On" to manually switch on the
generator relay.
Select "Auto" to allow the Sunny Island
3324/4248 to automatically control the
generator request relay.
40-8 SunnyBoys
(B) No
Yes No Select "No" when no Sunny Boys are
installed in the system.
Select "Yes" when Sunny Boys are used in
the same system as the Sunny Island
3324/4248.
Note: If Sunny Boys are used in the same
system, then special parameters must be
set in the Sunny Boy inverters. This is
explained in section 13 "Connecting
Sunny Boy Inverters" (Page 117).
40-9 Offset_Calib
(Stby) Start
Stop Stop If this parameter is set to "Start", the
Sunny Island 3324/4248 begins an offset
calibration. This calibration is necessary
when the "OffsCalib" fault message is
shown in the display.
As soon as the offset calibration has been
successfully completed, the "40-9
Offset_Calib" parameter automatically
resets to the value "Stop".
No. Name Range/
unit Default Description