SMA SI 3324 Installation - Manual (Page 74)

Commissioning SMA Technologie AG
Page 74 SI3324/4248-14:SE2406 Installation Guide
8.5 Operation with a Generator
If you wish to use a generator with the system, then you must set the generator type,
the type of generator connection and the maximum output current delivered by the
generator. To reach the generator menu, start in the main menu (Home Screen) and
use the arrow keys to scroll to Settings (20), then press Enter and scroll to the
Generator Settings (24) menu. In this menu, you can change all parameter values
relating to a connected generator.
The following section describes the settings for the following particularly important
commissioning parameters in detail:
• "24-1 GenControl" - Selection of the generator type
• "24-2 AmpacGenMax" - Max. generator output current
• "24-3 GenOperation" - Generator request
The remaining parameters of the Generator Settings (24) menu are described in
section 12 "Generator" (Page 111). You can find information on connecting and
setting parameters in your system in section 10 "System Examples" (Page 87)). All
adjustable parameters are also listed in tabular form in section 17.2.2 "Adjustable
System Parameters" (Page 134).
You require the installer password in order to set parameters "24-4 to 24-16"
(see section 8.3 "Password Entry" (Page 69)).