SMA SI 3324 Installation - Manual (Page 133)

SMA Technologie AG Menu Structure and Parameter Lists
Installation Guide SI3324/4248-14:SE2406 Page 133
Battery Meters
Generator Meters
No. Name Range/unit Default Description
12-1 BatVoltage 0 to 80 VDC N/A Battery voltage
12-2 BatCurrent -200 to +200 ADC N/A Battery current
12-3 BatTemp -40 to +200°C N/A Battery temperature
12-4 BatState Normal Warning
Low
Critical N/A Battery state
12-5 BatChargeMode Boost
Full
Float
Equalize N/A Battery charging process
12-6 TabsorbLeft 0 to max min N/A An absorption period is assigned to every
charging process. The Sunny Island 3324/
4248 must keep the generator running
during this time, even when this is only
partially loaded. The value of
"TabsorbLeft" shows the time remaining for
the absorption phase.
12-7 BatChargeVolt SI 4248
44 to 62.4 VDC Desired value of the battery charging
voltage
SI 3324
27 to 31.2 VDC
No. Name Range/
unit Default Description
13-1 VacGenerator 0 to 260 VAC N/A Inverter input voltage
(AC input)
13-2 AmpacGenerat -60 to +60 AAC N/A Inverter input current
(AC input)
13-3 FacGenerator 0 to 70 Hz N/A Inverter input frequency
(AC input)
13-4 PacGenerator -20 to +20 kWAC N/A Inverter input power
(AC input)