SMA SI 3324 Installation - Manual (Page 27)

SMA Technologie AG Installation
Installation Guide SI3324/4248-14:SE2406 Page 27
4.1.5 Wall Mounting
The Sunny Island 3324/4248 should be operated hanging vertically. To make the
job easier, we recommend you use the supplied wall bracket to mount the Sunny
Island 3324/4248 and use a spirit level to ensure correct alignment. The condition
and type of material used in the mounting surface determines the manner in which
the wall mounting is fastened.
In solid concrete or block walls the wall
bracket is fastened using the three outer holes.
Use type SX 8 wall anchors and (e. g.)
stainless steel hexagon bolts (6 mm x 50 mm)
with suitable washers, according to the DIN
571 standard.
This figure shows a detailed view of
the center distances of the holes for
the wall bracket when installing on
a solid concrete or block wall.
Island Sunny
310 mm
260 mm