SMA SI 3324 Installation - Manual (Page 30)

Installation SMA Technologie AG
Page 30 SI3324/4248-14:SE2406 Installation Guide
4.2.2 Wall Bracket
1. Mount the wall bracket (1). You can use
the wall bracket as a drilling template to
mark the positions for drilling the holes.
2. Then hook the Sunny Island 3324/4248
onto the wall bracket (2) at its upper
mounting plate so that it cannot be
moved sideways.
3. Secure the Sunny Island 3324/4248
against being raised by screwing the
angle bracket (see section4.2.1 "Angle
bracket on the underside" (Page 29)) to
the lower threaded holes of the wall
bracket using the supplied M6 x 10 mm
bolt.
4. Make sure the Sunny Island 3324/4248
is positioned securely on the bracket.
2
1
1
3