SMA SI 3324 Installation - Manual (Page 16)

The Sunny Island 3324/4248 SMA Technologie AG
Page 16 SI3324/4248-14:SE2406 Installation Guide
1
torque wrench with flathead screwdriver adapters:
size 10 mm
size 5.5 mm
size 2.5 mm
1 set hexagon/Allen keys, 3 mm to 8 mm
cable ties
1 cable knife
cable lugs
1 combination pliers
1 Phillips screwdriver, PH1
1 Phillips screwdriver, PH2
cables (see sections 5.1 "Grounding" (S. 33); 5.2 "DC Connection" (S.
36), 5.3 "AC Connection" (S. 40))
1 10 mm open-end/ring wrenches or socket wrench
1 19 mm open-end/ring wrenches
1 24 mm open-end/ring wrenches
1 30 mm open-end/ring wrenches
1
crimping tool for the cable end sleeves (suitable for cable cross-
sections of 2.5 mm², 4 mm², 10 mm² to 50 mm²)
1 flathead screwdriver, 0.4 x 2.5 mm
1 flathead screwdriver, 1.0 x 10 mm
1 flathead screwdriver, 1.0 x 5.5 mm
heat shrink tubing
1 diagonal cutting pliers
Installation of the Sunny Boy or Windy Boy:
1
service cable, to allow settings to be made (see section 2.7 "SMA
Products (Optional)" (S. 17))
1
PC/laptop with the Sunny Data software (available as a free
download from
www.SMA.de )
1
access permission: In order to set grid relevant parameters in the
Sunny Boy (see section 13.2 "Setting Sunny Boy Parameters" (S.
118)), you need a special access code, the installer code. You can
obtain this personal code from the Sunny Boy hotline (telephone: +49
561 9522 499).