SMA SI 3324 Installation - Manual (Page 64)

Commissioning SMA Technologie AG
Page 64 SI3324/4248-14:SE2406 Installation Guide
Generator:
• ____ none
• ____ manual (the generator must be manually started)
• ____ two-wire (the generator can be automatically started (with a single
contact))
• ____ GenMan option (the generator can be automatically started (with multiple
contacts))
Maximum generator output current: ________A (0.0 to 56.0).
Make the parameter settings using the sections shown in the process diagram
below. Skip all sections that you do not require. Only start the Sunny Island
3324/4248, as described in section 8.9 "Starting after First Commissioning"
(Page 81), after you have set all necessary parameters.
Note that you must first enter the installer password before some parameters
can be changed (see section 8.3 "Password Entry" (Page 69)) . You will find an
overview of all necessary parameter information in section 17 "Menu Structure
and Parameter Lists" (Page 130).
Comprehensive parameter lists for your system can be obtained from the
Sunny Island hotline at
• (+49) 561 95 22 - 399
The following information will help our technicans in setting the correct
parameter values for your system. Have this information available when you
call:
• Battery type
• Battery capacity
• If a generator exists:
- Generator type
- Generator capacity
• Is a Sunny Boy inverter connected? Yes/No