HEIDENHAIN TNC 320 (34055x-06) - Manual (Page 91)

Opening programs and entering 3.2
3
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
91
Function Soft key/Key
Set the selected word to zero
Erase an incorrect number
Clear a (non-blinking) error message
Delete the selected word
Delete the selected block
Erase cycles and program sections
Insert the block that you last edited or
deleted
Inserting blocks at any desired location
Select the block after which you want to insert a new block and
initiate the dialog
Editing and inserting words
Select a word in a block and overwrite it with the new one. The
plain-language dialog is available while the word is highlighted
To accept the change, press the END key
If you want to insert a word, press the horizontal arrow key
repeatedly until the desired dialog appears. You can then enter the
desired value.
Looking for the same words in different blocks
Set the AUTO DRAW soft key to OFF.
Select a word in a block: Press the arrow key
repeatedly until the highlight is on the desired
word
Select a block with the arrow keys
The word that is highlighted in the new block is the same as the
one you selected previously.
If you have started a search in a very long program,
the TNC shows a progress display window. You then
have the option of canceling the search via soft key.