HEIDENHAIN TNC 320 (34055x-06) - Manual (Page 330)

Programming: Special functions
10.2 Working with the Parallel Axes U, V and W
10
330
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
FUNCTION PARAXCOMP DISPLAY
Use the
PARAXCOMP DISPLAY function to activate the display
function for parallel axis movements. The TNC considers the
traverse movements of the parallel axis in the position display of the
associated principal axis (sum display). Therefore, the position display
of the principal axis always displays the relative distance from the tool
to the workpiece, regardless of whether you move the principal axis
or the minor axis.
Proceed as follows for the definition:
Show the soft-key row with special functions
Select the menu for defining various plain-language
functions
Select
FUNCTION PARAX
Select
FUNCTION PARAXCOMP
Select
FUNCTION PARAXCOMP DISPLAY
Define the parallel axis whose movements the TNC
is to take into account in the position display of the
associated principal axis
NC block
13 FUNCTION PARAXCOMP DISPLAY W
FUNCTION PARAXCOMP MOVE
The
PARAXCOMP MOVE function can be used only in
connection with straight-line blocks (
L).
The TNC uses the
PARAXCOMP MOVE function to compensate
for the movement of a parallel axis by performing a compensation
movement in the associated principal axis.
For example, if a parallel axis moves in the negative W-axis direction,
the principal axis Z simultaneously moves in the positive direction by
the same value. The relative distance from the tool to the workpiece
remains the same. Application in gantry-type milling machine: Retract
the spindle sleeve to move the cross beam down simultaneously.
Proceed as follows for the definition:
Show the soft-key row with special functions
Select the menu for defining various plain-language
functions
Select FUNCTION PARAX
Select
FUNCTION PARAXCOMP
Select
FUNCTION PARAXCOMP MOVE
Define the parallel axis
NC block
13 FUNCTION PARAXCOMP MOVE W