HEIDENHAIN TNC 320 (34055x-06) - Manual (Page 497)

Machine-specific user parameters 16.1
16
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
497
Parameter settings
100 to 9999: Program length to which geometry should be tested
DIN/ISO programming: Block number increment
0 to 250: Increment for generating DIN/ISO blocks in the program
Line number up to which identical syntax elements are searched for
500 to 9999: Search for cursored-in elements with up/down arrow buttons
Path specifications for end users
List with drives and/or directories
Drives and directories entered here are shown by the TNC in the file manager
FN 16 output path for execution
Path for FN 16 output if no path has been defined in the program
FN 16 output path for BA programming and test run
Path for FN 16 output if no path has been defined in the program
Settings for the file manager
Display of dependent files
MANUAL: Dependent files are displayed
AUTOMATIC: Dependent files are not displayed
Universal Time (Greenwich Time)
Time difference to universal time [h]
-12 to 13: Time difference in hours relative to Greenwich Mean Time
serial Interface: See "Setting up data interfaces", page 470