HEIDENHAIN TNC 320 (34055x-06) - Manual (Page 480)

MOD functions
15.9 Ethernet interface
15
480
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
Setting Meaning
Mount device Connection over NFS: Directory name
to be mounted. This is formed from the
network address of the device, a colon, a
slash and the name of the directory. Entry
of the network address as four decimal
numbers separated by points (dotted-
decimal notation), e.g. 160.1.180.4:/
PC. When entering the path name, pay
attention to capitalization.
To connect individual Windows computers
via SMB: Enter the network name and
the share name of the computer, e.g. \
\PC1791NT\PC
Mount point Device name: The device name entered here
is displayed on the control in the program
management for the mounted network, e.g.
WORLD: (The name must end with a colon!)
File system File system type:
NFS: Network File System
SMB: Windows network
NFS option rsize: Packet size in bytes for data reception
wsize: Packet size for data transmission in
bytes
time0=: Time in tenths of a second, after
which the control repeats an unanswered
Remote Procedure Call.
soft: If YES is entered, the Remote
Procedure Call is repeated until the NFS
server answers. If
NO is entered, it is not
repeated.