HEIDENHAIN TNC 320 (34055x-06) - Manual (Page 168)

Programming: Programming contours
6.1 Tool movements
6
168
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
6.1 Tool movements
Path functions
A workpiece contour is usually composed of several contour
elements such as straight lines and circular arcs. With the path
functions, you can program the tool movements for
straight lines
and circular arcs .
FK free contour programming
If a production drawing is not dimensioned for NC and the
dimensions given are not sufficient for creating a part program,
you can program the workpiece contour with the FK free contour
programming. The TNC calculates the missing data.
With FK programming, you also program tool movements for
straight lines and circular arcs .
Miscellaneous functions M
With the TNC's miscellaneous functions you can affect
the program run, e.g., a program interruption
the machine functions, such as switching spindle rotation and
coolant supply on and off
the path behavior of the tool