beautypg.com

Function paraxcomp off, Function paraxmode, Working with the parallel axes u, v and w 10.2 – HEIDENHAIN TNC 320 (34055x-06) User Manual

Page 331

background image

Working with the Parallel Axes U, V and W

10.2

10

TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013

331

FUNCTION PARAXCOMP OFF

Use the

PARAXCOMP OFF function to switch off the parallel-axis

functions

PARAXCOMP DISPLAY and PARAXCOMP MOVE. Proceed as

follows for the definition:

Show the soft-key row with special functions

Select the menu for defining various plain-language
functions

Select

FUNCTION PARAX

Select

FUNCTION PARAXCOMP

Select

FUNCTION PARAXCOMP OFF. If you want

to switch off the parallel-axis functions only for
individual parallel axes, then the respective axis
must be specifically indicated.

NC blocks

13 FUNCTION PARAXCOMP OFF
13 FUNCTION PARAXCOMP OFF W

FUNCTION PARAXMODE

To activate the

PARAXMODE function, you must always

define three axes.

If you combine the

PARAXMODE and PARAXCOMP

functions, the TNC deactivates the PARAXCOMP
function for an axis that was defined in both functions.
When you deactivate PARAXMODE, the PARAXcomp
function becomes active again.

Use the

PARAXMODE function to define the axes the TNC is to use

for machining. You program all traverse movements and contour
descriptions in the principal axes X, Y and Z, independent of your
machine.

Define the three axes in the

PARAXMODE function (e.g. FUNCTION

PARAXMODE X Y W), which the TNC is to use to execute the
programmed traverse movements.

Proceed as follows for the definition:

Show the soft-key row with special functions

Select the menu for defining various plain-language
functions

Select

FUNCTION PARAX

Select

FUNCTION PARAXMODE

Select

FUNCTION PARAXMODE

Define the axes for machining

NC block

13 FUNCTION PARAXMODE X Y W