QuickLabel Plexo! 653 - Manual (Page 99)

FTP Printer Management
Plexo! 453 / Plexo! 653 User Guide 87
FTP Firmware Update
To carry out a firmware update, you must be logged on with the username “root”. See
“FTP logon” on page 85.
1 Ensure that the label printer is in “Ready” mode. See “Status tab” on page 28.
2 Set the “binary” transfer mode in the FTP client.
3 Open the “system” folder.
4 Copy a valid firmware file (e.g. 308_7301.x2) to the "system" folder.
FTP-Firmware-UPd appears in the display of the printer. The status of the saving
procedure is shown by a progress indicator in the display. The printer resets
automatically after the update is carried out successfully.
You can check whether the firmware update was carried out successfully on the
“Status” tab of the printer website.
usbmem Data of the USB flash drive if the USB
flash drive is not default. The files are
separated into several subfolders
accordingly based on their type. When
copying the files to the "cf" folder,
type-based sorting occurs automatically
in the subfolders.
Folder name Contents