QuickLabel Plexo! 653 - Manual (Page 106)

Memory cards
94 Plexo! 453 / Plexo! 653 User Guide
9 Press any button.
Printing file contents
The label files found on a memory card consist of a sequence of printer commands. You
can print these command sequences in the form of text with the ASCII dump (Card)
function.
1 Insert printable medium (labels, endless paper) which extends across the entire
printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer ribbon
with the maximum width.
3 Insert a memory card.
4 Press the menu button.
5 Select the ASCII dump (Card) function in the Memory card menu.
6 Press the Enter button.
The index of the memory card is shown in the display.
7 Select the desired label file in the index of the card with the up and down buttons.
8 Start printout with the Enter button.
The data printout is started after four lines are received. For this reason, it is often
necessary to call up the last few lines of a label description with the feed button.
You can cancel the printout of the label description with the cancel button.