QuickLabel Plexo! 653 - Manual (Page 84)

Test Functions
72 Plexo! 453 / Plexo! 653 User Guide
Status Print
The Status print function prints a test image containing information on the
configuration and status of the printer. The printout occurs using the heat level and
print speed specified in the Setup > Print param. menu.
Note: The printout occurs without taking the label gaps into consideration. This is why endless
media are most suitable for this purpose.
1 Insert printable medium (labels, endless paper) which extends across the entire
printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer ribbon
with the maximum width.
6 Serial number of the PCB CPU PCB #111070553751
7 Revision of the CPU PCB and the
CPU PCB/CPU Rev. 7/4
8 Operative time and number of
printed labels Hours/no. of labels: 156h/3564
9 Previously printed paper lengths
with thermal direct printing / ther-
mal transfer printing Thermal/Transfer 13,54m/269,11m
10 IP address of the label printer
when connected to a network DHCP-IP 192.168.9.13
11 mDNS name of the printer for
Zeroconf (Zeroconf is a set of tech-
niques that automatically create a
usable IP network without configu-
ration or special servers.) mDNS: cab-28154.local
12 MAC address of the network
adapter on the CPU PCB MAC 0002E70228F4
13 Type and size of the installed mem-
ory medium CF 30MB
14 Size of the Internal Flash-File-Sys-
tems IFFS 8MB
15 Resolution of the installed thermal
printhead TPH 300dpi,1248dots
Line Meaning Example