Print directory, Copy memory card, Print directory copy memory card – QuickLabel Plexo! 653 User Manual
Page 104
Memory cards
92
Plexo! 453 / Plexo! 653 User Guide
Print Directory
You can print out the index of the installed memory card with the Print directory
function.
1
Insert printable medium (labels, endless paper) which extends across the entire
printing width.
2
If the printout is to occur using thermal transfer printing, insert transfer ribbon
with the maximum width.
3
Press the menu button.
4
Select the Print directory function in the Memory card menu.
5
Start printout with the Enter button.
The printout contains:
•
the name of the memory medium
•
information on the saved files
•
the size of the available memory area
Copy Memory Card
All the data from one memory medium can be copied to another one of the same type
with the Copy memory card function. Copying between memory media with different
memory capacities is possible. You can also use memory media which already contain
data as a destination medium.
Caution: Data loss when copying.
If files with the same name are found on the original and copy media, the files on the copy
medium are overwritten without any prior notification. In addition, removal of the memory
medium during the copying procedure leads to data loss.
•
Check files for the same name before copying.
•
Only remove or insert memory media when so instructed in the display.
You can prevent unauthorized copying of memory cards by using a PIN.
1
Insert original card.
2
Press the menu button.
3
Select Memory card > Copy memory card with the right and left arrow buttons.
4
Press the Enter button.
A selection field with the selection No appears in the display.
5
Use the up and down arrow buttons to select Yes.
6
Press the Enter button.