Accessories, Cutter, External keyboard – QuickLabel Plexo! 653 User Manual
Page 63: Connecting external keyboard, Special key functions, Chapter: 8, Cutter external keyboard, Connecting external keyboard special key functions
Plexo! 453 / Plexo! 653 User Guide
51
8
Accessories
Cutter
See “CU4/CU6 Cutter Accessory” on page 59.
External keyboard
You can connect an external keyboard or compatible input device (e.g. barcode
scanner) directly to the printer. Using an external keyboard facilitates the entry of
variable data while processing print jobs and printing from the memory card.
Input prompts and the data received from the keyboard are shown in the display.
Connecting external keyboard
You can connect any MF-2-compatible USB keyboard which supports code set 3 to the
printer.
•
Insert connection cable of the keyboard into the USB master interface on the back
of the printer.
Special key functions
General
Key
Function
[F1]
Executes the Label from card memory
card function.
[F2]
Prints an additional label from the last
print job. Corresponds to the command
A 1 CR.
[F3]
Repeats the last print job with renewed
polling of the variable data and polling
of the label quantity.
[F8]
Functions in the same manner as feed.
[Enter]
Switches to the offline menu. Functions
in the same manner as menu.
[Esc]
Functions in the same manner as cancel.
[Space]
Functions in the same manner as pause
Not for continuing after an error.