QuickLabel Plexo! 653 - Manual (Page 72)

CU4/CU6 Cutter Accessory
60 Plexo! 453 / Plexo! 653 User Guide
• Do NOT touch the area of the moving blades!
Mounting the Tear-off Plate / Dispense Plate
For cutter operation there has to be mounted a tear-off plate or a dispense plate on the
printer, to lead the material through the blades of the cutter.
The printers have such a plate mounted when delivered.
1 To dismount the rewind guide plate loosen the screws (2).
2 Slide the rewind guide plate (1) to the right and remove it.
3 Place the tear-off plate (3) on the screws (2) and tighten these screws.