QuickLabel Plexo! 653 - Manual (Page 31)

Configuration
Plexo! 453 / Plexo! 653 User Guide 19
Printhead pos. Y Shifting of the entire print image in
the direction of paper flow. With
positive values, printing begins
later in the direction of paper flow.
Shifting of the print image in the
direction of paper flow also influ-
ences the peel and cutting posi-
tions.
• Correct the Peel position and
Cut position parameters by the
same value in the opposite
direction.
You can also set the Printhead pos.
Y via software. The offset values
from the Machine param. menu
and the software are added
together.
0.0 mm
Offset upper-lower head Plexo! Duo 453 Only
Shift the print image of the upper
printhead in the direction of the
media.
With positive values, printing
begins later in the direction of the
media. The Offset upper-lower
head can also be set via software.
The offset values from the Machine
param. menu and the software are
added together.
0,0 mm
Tear-off pos. Shifting of the tear-off position in
the direction of paper flow. With
positive values, the label strip is
transported farther out of the
printer. 0.0 mm
Cutter Configuration of the optional cutter. See “CU4/CU6 Cutter Accessory” on
page 59.
If cutter is not connected, this option is not available.
Brightn. LCD Brightness of the LCD display from
1 to 10 10
Parameter Meaning Default